This 8-week strength program will help you squat, deadlift, and bench with the best. Kick your excuses to the curb. Get ready for heavy weights and insane gains.
We say it all the time: Bodybuilding is about how big and awesome you look, not how much weight you can lift. Bodybuilders strive for complete development of the muscles and the overall balance and flow of the physique. Toward that end, we discourage "ego-lifting" and being concerned about the number of plates on the bar.
Instead, it's all about concentrating on making the muscles work through the full range of motion. After all, weights are simply tools to help sculpt the perfect physique. So why are we giving you a program tailored for guys who just want to lift heavy-ass weights? Simple. Central to continuing on the path to greater growth is progressive overload.
This can take many forms, including advanced techniques like supersets, giant sets, as well as increased volume, decreased rest periods between sets, training frequency, high-intensity training with forced reps, negative reps, and other methods. But the most fundamental form of progressive resistance is increasing the amount of weight used on exercises. The more you train a muscle, the stronger it will get.
And a stronger muscle is a bigger muscle and vice versa. But eventually you will reach a point where you are using weights that are close to your maximum and strength gains will stagnate and even (gasp!) go backward. This is when training specifically for strength can help you breakplateaus and get you back on track to making gains.
The best part—in addition to boosting your numbers and consequently, beefing up your answer to the age-old question of how much do you bench?—is that when you return to traditional bodybuilding training, you will be significantly stronger and able to use more weight. This means greater overload on the muscles, forcing them to grow bigger to keep pace with your newfound strength.
A Strong Suggestion
In the following paragraphs, you'll find tips (power points) that go with the workouts. But a specific tip that pops up in the last week of the program does not mean it should be saved for that period only. All these pointers apply for the duration of the program, so read the whole thing before going to the gym and making people stare in awe at your superhuman feats of strength.
Power Defined ///
Power is the rate at which energy is transferred or used. In the gym, this translates to the ability to use strength in a fast, explosive manner. If you've ever seen world-class powerlifters in action, you know that the concentric portion of the lift (the positive phase) is performed as quickly as possible.
The bar is lowered slowly and pushed up with tremendous force. This is power. All of your lifts will be performed in this manner.
Getting stronger is not a matter of loading up the bar with your 1RM every workout. In fact, consistently training at or near your limit is a sure way to stall out altogether. Getting stronger is a step-by-step process that is built up gradually, in increments, over time. The best method for doing this is through periodization, or cycle training, where weights and reps change over a set time period.
Periodization elicits general adaptation syndrome, which is the body's reaction to stress. Here's how it works: New stress (training) sets off an alarm reaction in the muscle, causing it to actually get weaker. But consistent exposure to that stress will eventually lead to increased strength, which is the body's method of adapting to the stress being placed upon it.
This state is not indefinite and lasts only for a few months at best until the body "peaks," at which point gains will diminish. Athletes in powerlifting, Olympic weightlifting, track and field, bodybuilding and other sports cycle their training so that they peak for a specific meet or contest. There are three major periodization schemes:
Linear periodization, where weights increase while reps decrease.
Reverse linear periodization, where weights decrease while reps increase.
Undulating periodization, where weights and reps increase and decrease sporadically.
Studies have proven that all three methods are the best way to make continuous gains and avoid the dreaded "wall" that stops progress. This program will utilize linear periodization, which research proves to be superior in producing strength gains.
The Max Factor
Even though this is an 8-week plan, it will actually take you 10 weeks to complete when you factor in 1RM testing the week before starting and the week after completing this program. Also, you won't be estimating your 1RM with a 5-rep or 10-rep max.
After all, in the final week of the program, you'll be down to two reps per set anyway. So suck it up and find your true 1RM on all three lifts, as it's the best way to accurately calculate your 80 percent, 85 percent, and 95 percent rep maxes during the program. Have spotters handy!
Take the weight you can normally lift for 10 reps to failure, multiply it by 1.33, and round up. For example, if you can bench 225 pounds for 10 reps, start your 1RM attempt with 300 pounds.
Allow plenty of rest between 1RM attempts. Whether or not your first lift was successful, rest 3-4 minutes between attempts.
If you were successful on the first try but know you can do more, add another 10-20 pounds for your next attempt. Keep adding 10-20 pounds until you reach a weight at which you fail. Use the last weight you were successful at as your 1RM.
If you weren't successful on your first attempt, don't be discouraged. Simply decrease the weight by 5-10 pounds and try again. Once you reach a weight that you can do for one rep, use that as your 1RM.
For the most accurate results, don't do a 1RM test for the bench press, squat, and deadlift all in the same workout. Spread them out over a week so that each lift gets its own 1RM testing session.
The Super Squat Checklist
The bar should rest near your midtraps and rear delts (rather than your upper traps). This will make it easier to balance the weight throughout the exercise.
Grasping the bar with your thumbs wrapped around the bar, bring you hands as close to your shoulders as possible and press the bar against your back. Squeezing your shoulder blades together and pulling your elbows forward will help you support the bar.
Keep your head aligned with your spine by fixing your gaze on an object at eye level. This will help maintain balance.
Maintain the arch in your lower back and push your chest up and out. Contract your spinal erector muscles and abdominals to keep your core tight.
Place your feet just beyond shoulder width; this positioning may vary slightly depending on your flexibility and comfort.
Keep a slight bend in your knees and contract your quads, hamstrings, and glutes. Take a deep breath and hold it as you begin your descent. This will support the spine by increasing pressure inside the abdominal and chest cavities.
Stick your glutes out as if sitting down in a chair. Descend until your upper legs are parallel to the floor.
Begin the ascent by driving through your heels. Imagine pushing the floor away as you thrust upward with your legs.
Concentrate on moving your hips before extending your knees. Keep your hips under the bar as much as possible to avoid leaning forward. This will relieve stress on your lower back.
As you ascend, force your knees out hard and push out on the sides of your shoes. This will help keep tension in your hips for greater strength.
Keep your heels on the floor to avoid leaning forward.
Without lifting your chin, push your head back to help contract your traps for greater stability.
Exhale as you pass the most difficult phase of the squat.
The Big Bench Checklist
Lie on a flat bench with your feet flat on the ground, beyond shoulder width and legs bent at about a 90-degree angle. The bar should not be in your sightline when it is racked. If it is, you risk bumping the rack with the bar when pressing the weight up.
Keep a slight arch in your lower back to maintain the natural curve of your spine.
Keep your glutes tightly contracted; press your shoulders and glutes into the bench.
Grip the bar slightly beyond shoulder width.
Wrap your thumbs around the bar to prevent your wrists from flexing too much, which could decrease both force production traveling through your forearms and your overall bench-press strength. Squeeze the bar as hard as possible to transfer force from your chest, shoulder and triceps to the bar.
Your starting position: Lift the bar off the rack so it's over your upper chest. Squeeze your scapulae together while lowering the bar. This will help stabilize your shoulder girdle and recruit your lats to help push up the weight.
In order to increase the pressure in your chest and abdominal cavity, take a big breath and hold it as you lower the weight.
Lower the bar slowly—a count of two seconds down will suffice—to nipple level or lower.
Make sure that your arms form an L in the bottom position when the bar reaches your chest.
Dig your shoulders into the bench and heels into the floor before pushing the weight up. (Imagine pushing the floor away from you with your feet.) Drive with your legs as you push the bar to transfer more force to your upper body. Keep your butt on the bench.
Press the bar as straight up as possible, trying to "rip the bar apart" by pulling your arms outward without changing your grip. Your upper arms should form a 45- to 60-degree angle to your torso as you lower the weight and press it up.
Exhale after passing the most difficult stage of the lift or after you reach the top position.
Raise The Dead Checklist
Stand over the barbell so that your shins are touching the bar.
Your feet should be about shoulder-width apart or less.
Your toes should point straight forward or slightly out (25 degrees at most).
Squat down to a position that is similar to the bottom position of a squat. However, the thighs will be slightly higher than parallel. Most of your weight should be on your heels to maximize the contribution of the hams and glutes.
Always use a staggered, or mixed, grip—one hand using an underhand grip and the other using an overhand grip—for maximal strength and minimal slippage.
Your arms should hang straight down and just outside of your thighs.
Your upper body should lean slightly forward at about a 45-degree angle to the floor.
Your shoulder blades should be tightly pulled together throughout the entire exercise.
Maintain the natural arch in your lower back.
Isometrically contract your entire body and exert a small measure of upward force on the bar before pulling it from the floor.
Keep your abs pulled in tightly and contracted throughout the lift.
The head should remain in a straight line with the back. To do this, pick a point on the floor about five or six feet ahead of you and focus on that point.
Take a deep breath in and hold it as you prepare to ascend.
As you stand up with the weight, imagine pushing the floor away from you with your feet.
Your hips and shoulders should ascend together. Do not let your glutes lead the movement.
During the ascent, the bar should travel along the front of the shins and legs.
When you reach full extension of the knees, hips, and back, you've hit the finish point.
In the finish position, the front of your shoulders should be behind the front part of the hips.
Exhale as you reach the top position.
Only allow a slight "tap" of the weights to the floor before beginning your next rep.
This is a five-day split that you can do on any of the five days of the week that fit your schedule. Just be sure to do them in the order listed regardless of the day of the week. Below is a sample schedule using a five-on, two-off scheme.